X4 Cults3D Cults3D · Free
X4 Case with Magnet Ring Slot (TPU Folio)
Folio-style TPU case with a built-in magnet-ring slot that keeps the ring in place, plus grooves for page-turn buttons.
Free
Free 3D Print Files
Print a free case for the Xteink X4
Nine free X4 case files on Printables, MakerWorld, Thingiverse, and Cults3D. Grouped by job: magnet mount, slim carry, or full-body. PETG for most. Nothing for the X3 yet.
Every file here is free. You need a printer and filament. Plan 2–4 hours per case. No X3 case files yet.
Pick by use case
🧲
Phone-back magnet mount
Keeps the X4's back magnet working so the reader still sticks to a phone.
1 design →Phone-back magnet mount cases
X4 Cults3D For phone-back carry. The ring-slot folio is the only file that locks the magnetic ring into the case. No adhesive. The ring does not slide.
Slim everyday carry cases
TPU flexes and soaks hits. PETG is stiffer and scratches less. Both work. Pick what your printer handles.
X4 Printables Printables · Free · PETG recommended
X4 Clip-On Case by Osaka System
Most-downloaded X4 case on Printables. Clips over the official protective case to add grip and protection.
Free
X4 MakerWorld MakerWorld · Free · PETG/PLA
Yuexingtong X4 Side Slide Case v2
Side-sliding X4 case singled out as a community favourite in the unofficial X4 FAQ.
Free
X4 Printables Printables · Free · TPU
X4 Case (TPU) by Mic Kuo
Flexible TPU X4 case that prints without supports; heat-treat the closed lid for a perfect fit. Includes a PDF guide.
Free
X4 Printables Printables · Free · PETG, no supports
Simple X4 Case (PETG) by AxioPaladin
Reversible X4 case: face-up to read, flip face-down to protect the screen in transit. PETG, no supports.
Free
Full-body protection cases
These designs close over the screen edge and cover every port and button.
X4 MakerWorld MakerWorld · Free · Bambu Basic/Matte PLA
X4 Full Body Case by fusselich
Multi-part snap-together case covering every button with a raised screen lip. 1,600+ downloads. Tuned for Bambu Basic/Matte PLA.
Free
X4 Thingiverse Thingiverse · Free · 3-part print
X4 360° Hinge Case by Zorian22
Three-part print (front, back, 360° hinge) that folds completely flush and snaps closed.
Free
fusselich's full-body case has 1,600+ downloads on MakerWorld, the highest count on this page.
Bonus: printable reading light
A snap-fit LED bar for the X4's top edge, not a case. Parts run about $5 to $10. No soldering.
X4 MakerWorld MakerWorld · Free 3MF · ~$5–10 in parts
SnapLight Snap-On Reading Light by Tripl3Head
Snap-fit 4-LED bar for the X4. Free 3MF: print the housing, add an LED board, USB-C module and LiPo. ~$5–10 in parts, no soldering.
Free
Designing your own?
Download the community reference model first. It's a caliper-measured model of the X4 body: ports, magnet holes, button cutouts. Drop it into CAD and build around it.
X4 Thingiverse Thingiverse · Free · For CAD design
X4 Device Reference Model by Zorian22
Caliper-measured 3D reference model of the X4, the base file for designing your own accessories.
Free
Print material
Pick filament before you print. The wrong one cracks, or flexes off the X4.
| Material | Rigidity | Best for | Notes |
|---|---|---|---|
| PLA | Rigid | Slim snap-on cases | Easiest and cheapest. Fine indoors. Brittle in heat or drops. |
| PETG | Semi-rigid | Most cases | Tougher than PLA in drops and heat. The usual pick for X4 cases. |
| TPU | Flexible | Folio and full-body cases | Absorbs hits. Slower to print, and it wants a direct-drive extruder. |
Where to find more files
X4 files live on four sites.
| Platform | X4 models | Best for |
|---|---|---|
| Printables | 15+ | Most organized. Best download stats. Prusa crowd. |
| MakerWorld | 27+ | Bambu Lab printers. Highest download counts. |
| Thingiverse | 5+ | Older files. Less maintained. |
| Cults3D | 3+ | Fewer files. More one-off designs. |
Questions
What is the best 3D printable case for the Xteink X4?
For most owners, fusselich's X4 Full Body Case on MakerWorld (1,600+ downloads) covers every surface, with a raised screen lip and port covers. For less bulk, the Osaka System clip-on on Printables is that site's most-downloaded X4 case. For phone-back magnet mounting, the Monke CAD ring-slot folio on Cults3D is the only design with a built-in ring pocket.
Should I print an Xteink X4 case in PLA or PETG?
PETG is the usual pick for most X4 cases. It takes hits better than PLA and holds up in a hot pocket or car. PLA works for snap-on clips, but it can crack or warp in heat. fusselich's full-body case is tuned for Bambu Basic or Matte PLA. If you print on a Bambu, follow that file.
Is there a 3D printable case for the Xteink X3?
None yet. Designers have been printing for the X4. The closest start is the Zorian22 X4 reference model on Thingiverse, which shows how they measured the body. You would repeat that work for the X3. X4 files will not fit.